By Alexander Ball 4Secure | November 2026
How a wave of cyberattacks against supermarket refrigeration systems exposed a growing weakness in connected infrastructure – and how organisations can protect themselves with the right security strategy.
A reminder that cyberattacks are no longer just about data.
When we think about cyberattacks, we tend to picture stolen customer information, encrypted files, financial fraud or disrupted IT systems. However, a series of attacks across Europe has demonstrated that the consequences of cybercrime can extend far beyond computers and servers.
In October 2026, supermarkets in France experienced a wave of cyberattacks targeting their refrigeration systems. Just weeks later, on 2 November, similar incidents were reported across several European countries, including Belgium, Sweden, Ireland, Luxembourg, Estonia, Finland and the Netherlands.
The impact was surprisingly physical. Refrigerators and freezers were remotely manipulated, temperatures rose dramatically and businesses were forced to remove or discard food to protect consumers. Some reports described freezer temperatures reaching as high as 50°C. This was not simply an IT inconvenience. It was an attack on the operational technology (OT) responsible for keeping food safe, businesses operational and supply chains functioning.
The incidents provide an important warning for every organisation operating connected infrastructure: if a system is connected to a network, it potentially represents an entry point for a cybercriminal.
What actually happened?
The attacks targeted refrigeration management systems used by supermarkets and other food businesses to monitor and control commercial cooling equipment. These systems are designed to make refrigeration more efficient. They allow engineers and facilities managers to monitor temperatures, adjust settings, diagnose faults and manage equipment remotely.
Manufacturers and technology providers, including Danfoss and Copeland/Dixell, supply equipment and software used within these environments.
According to France’s national cybersecurity agency, CERT-FR, multiple compromises were identified involving remote refrigeration controllers, including:
- Danfoss AK-SM controllers.
- Danfoss AK-SC controllers.
- Copeland XWEB systems.
- Dixell XWEB systems.
The French authorities specifically warned that exposing management interfaces directly to the internet is contrary to good security practice.
The apparent method of disruption involved attackers gaining unauthorised access to refrigeration management systems and manipulating their operation. Reports surrounding the incidents described refrigeration units being placed into defrost modes or having temperature settings changed. Rather than stealing information, the attackers were able to interfere with the physical process controlled by the technology.
The consequences were significant. The November incidents affected numerous supermarket operators, including Carrefour, Delhaize, ICA, Coop and Musgrave’s SuperValu stores. Belgium alone reported disruption across dozens of retail locations. In Ireland, 13 SuperValu stores were reported to have experienced refrigeration-related disruption.
Although the precise relationship between all the incidents remains under investigation, the similarities between the French and subsequent European attacks are concerning. At the time of writing, no confirmed attribution has established who was responsible or whether every incident formed part of the same coordinated campaign.
Sources: CERT-FR, European reporting by Euronews, Reuters and Associated Press, November 2026.
How could this have happened?
The most important lesson is that refrigeration equipment is no longer simply mechanical infrastructure. Modern refrigeration systems are connected, remotely managed and increasingly integrated with wider business networks. This creates efficiencies, but it also introduces cyber risks.
There are several factors that may have contributed to the vulnerabilities exploited in these incidents.
1. Internet-exposed management systems
Remote management is extremely useful for refrigeration engineers. It allows them to monitor equipment and resolve problems without physically visiting every location. However, when management interfaces are exposed directly to the public internet, they become accessible to potential attackers. If these interfaces are insufficiently protected, use weak authentication or contain unpatched vulnerabilities, an attacker may be able to gain control.
CERT-FR specifically identified internet exposure as a security concern and advised organisations to remove public internet exposure from affected refrigeration controllers.
2. Legacy technology and outdated software
Many operational environments contain equipment that has been installed for years. Unlike conventional office IT, operational technology cannot always be upgraded or replaced immediately. Systems may be expensive, difficult to take offline and dependent on specialist software or hardware. This creates a challenge: equipment that performs an essential operational function may continue running despite having outdated software or inadequate security controls.
The French cybersecurity authority warned that simply resetting compromised equipment would not be sufficient if the underlying vulnerability remained. Systems that have reached end-of-life and no longer receive security updates are particularly concerning.
3. Remote access without sufficient controls
Third-party engineers and maintenance providers often require remote access to operational equipment. This is a legitimate business requirement, but it introduces another potential route into an organisation’s infrastructure.
If remote access is not properly controlled, monitored and restricted, compromised credentials or insecure connections can create opportunities for unauthorised access. Remote access should never mean unrestricted access.
4. Insufficient separation between networks
One of the most important cybersecurity principles is network segmentation. Operational technology should not automatically be trusted simply because it sits within an organisation’s internal network.
If business IT systems, management networks and operational systems are connected without appropriate restrictions, an attacker who compromises one environment may potentially gain access to another. The consequences can be particularly serious where systems control physical processes.
The refrigeration attacks demonstrate why organisations must consider not just protecting individual devices, but also controlling the connections between them.
What does the National Cyber Security Centre say?
The UK’s National Cyber Security Centre (NCSC) has been increasingly vocal about the risks associated with internet-exposed operational technology. In its 2026 advisory, Disruptive cyber activity highlights risk from internet-exposed systems and edge devices, the NCSC warned that operational technology across multiple sectors is being targeted.
It specifically advises organisations to:
- Maintain a complete inventory of operational technology assets and connections.
- Ensure OT devices are not directly accessible from the public internet.
- Replace default passwords and strengthen authentication.
- Use multi-factor authentication wherever supported.
- Keep firewalls, routers and remote access devices updated and supported.
- Adopt secure industrial and management protocols.
- Log and monitor connections to operational systems.
- Separate OT, management and business IT networks.
- Maintain tested backups and recovery procedures.
These recommendations are particularly relevant to the refrigeration incidents. The NCSC’s message is clear: organisations must understand what is connected, who can access it, what information is exchanged and how a compromise could affect their wider operations.
The NCSC also highlights the importance of preparing for incidents rather than relying entirely on preventative security. After all, no security system can guarantee that an organisation will never be attacked. What matters is whether the organisation can detect, contain and recover from an incident before it becomes a major operational failure.
Where controlled information exchange can reduce exposure
The refrigeration incidents demonstrate why traditional cybersecurity approaches need to evolve. Firewalls, antivirus software and endpoint protection remain important, but organisations also need to consider how information moves between different networks and how critical systems can be protected without preventing legitimate operational activity.
1. Cross Domain Solutions: controlling the movement of information
4Secure’s Cross Domain Solutions are designed to allow information to move securely between different network environments, including networks with different levels of security and trust. Rather than allowing unrestricted connectivity between systems, information transfers can be governed by defined security policies. This is particularly important in environments where operational technology needs to share information with corporate IT systems.
For example, a supermarket may need refrigeration temperature information to be available to its central facilities management team. However, that does not mean the corporate network should have unrestricted access to the refrigeration controllers themselves. A properly designed Cross Domain Solution can help provide access to approved information while maintaining separation between critical operational environments.
The benefit: Organisations can gain the operational visibility they need without unnecessarily exposing the systems responsible for running essential infrastructure.
2. Data Diodes: protecting critical systems through one-way communication
One of the strongest approaches to protecting highly critical environments is to control the direction in which information can travel. 4Secure provides Data Diode technology, which uses hardware-enforced one-way data transfer. In an appropriate architecture, information can flow out of a protected operational network to a monitoring or reporting environment, without providing a corresponding route back into the protected network.
Consider a refrigeration environment where temperature readings, equipment status and system alerts need to be sent to a central monitoring platform. A one-way architecture could allow this information to leave the protected environment while preventing commands or unauthorised traffic from travelling back through that connection. This is especially valuable where organisations need visibility of their operational systems but do not require remote control through the same communication channel.
A Data Diode is not a universal replacement for remote engineering access, and it must be designed around the operational requirements of the environment. However, where one-way monitoring is sufficient, it can significantly reduce the available attack surface.
The benefit: Critical systems can share essential operational information without creating an unrestricted two-way connection.
3. TrustedFilter®: inspecting and validating information
4Secure’s TrustedFilter® technology provides another important layer of protection. Rather than relying solely on network-level security, TrustedFilter® inspects and verifies information at the content level. This helps organisations apply controls to the information being transferred between different environments. In complex operational environments, this is important because not all data should automatically be trusted simply because it originates from an apparently legitimate system.
A carefully designed information-exchange architecture can help ensure that only approved information is transferred according to defined policies. For example, organisations may need to make operational information available to business applications, reporting systems or external stakeholders without providing unrestricted access to the underlying OT environment. TrustedFilter® can support this controlled approach to information exchange, complementing existing firewalls and other security controls.
The benefit: Greater assurance over what information moves between systems, helping organisations reduce unnecessary exposure and maintain control over sensitive operational data.
4. Cybersecurity consultancy: understanding the risks before they become incidents
Technology alone cannot solve every cybersecurity problem. Organisations need to understand their infrastructure, identify vulnerabilities and develop an appropriate security architecture.
4Secure’s consultancy services can help organisations consider how their systems should be connected, how information should move between security domains and what protections are required for their operational environments.
Following an incident such as the European refrigeration attacks, a useful starting point would be an assessment covering:
- Which operational systems are connected to the internet?
- Are any management interfaces publicly accessible?
- Which third parties have remote access?
- Are default or shared credentials still being used?
- Are systems running unsupported software?
- Is the operational network separated from corporate IT?
- Can information be monitored without providing direct access to critical equipment?
- Are there tested isolation and recovery procedures?
The answers provide the foundation for a proportionate security improvement programme.
The benefit: Organisations can move away from reactive cybersecurity and towards a planned, risk-based approach that protects their essential operations.
Why this matters beyond supermarkets
It would be a mistake to view these attacks as a problem exclusive to the retail and food industries. The same principles apply to almost every sector that relies on connected operational technology.
Consider:
- Manufacturing: Attackers interfering with production lines, industrial machinery or automated processes.
- Energy: Unauthorised access to monitoring and control environments.
- Healthcare: Disruption to building management systems, refrigeration used for medicines or other essential equipment.
- Transport: Interference with connected infrastructure and operational management systems.
- Data centres: Disruption to cooling systems that protect critical computing infrastructure.
- Food distribution: Attacks affecting temperature-controlled storage and supply chains.
In each example, the potential consequences extend beyond the loss of data. A successful attack could affect safety, availability, productivity, customer confidence and the ability to deliver essential services.
This is why the NCSC’s emphasis on operational technology security is so important. Organisations must recognise that their cyber risk extends to every connected device, management interface and external connection that supports their operations.
Five practical steps every organisation should take now
The recent attacks should prompt organisations to review their security arrangements, particularly where operational technology is involved.
We recommend the following immediate priorities:
- Audit your connected infrastructure. Identify every operational device, management interface, remote connection and external service. You cannot protect systems you do not know exist.
- Remove unnecessary internet exposure. Critical operational equipment should not be directly accessible from the public internet. Use appropriately secured and controlled remote access where required.
- Separate critical systems. Keep operational technology, business IT and management networks appropriately segmented. Only allow the communication that is genuinely necessary.
- Control and monitor information flows. Consider whether Cross Domain Solutions, Data Diodes and content-level filtering could provide a safer way to exchange information between environments.
- **Prepare for the worst. **Maintain secure configuration backups, documented incident response procedures and a tested recovery plan. Make sure operational teams understand how to respond if equipment is compromised.
These steps should be reviewed alongside manufacturer security advisories and the latest NCSC guidance.
Protecting the systems that keep businesses running
The European refrigeration attacks are a powerful reminder that cyber threats are evolving. Attackers are no longer exclusively interested in stealing information or demanding ransom payments. Increasingly connected infrastructure creates opportunities to disrupt the physical systems on which businesses and communities depend. A supermarket freezer may seem an unlikely cyber target, but the consequences of manipulating its controls can be immediate, expensive and potentially damaging to public confidence.
The lesson is simple: operational technology must be treated as a critical cybersecurity priority, not an afterthought. Organisations need to move beyond the assumption that internal networks are automatically safe. They must understand their connected infrastructure, restrict unnecessary access, control the movement of information and build resilience into the systems that matter most.
At 4Secure, we believe that secure connectivity should enable organisations to operate more effectively, not introduce unnecessary risk. Through Cross Domain Solutions, hardware-enforced Data Diodes, TrustedFilter® and specialist consultancy, 4Secure helps organisations approach secure information exchange in a more controlled and assured way.
Because protecting an organisation is not just about securing the information it holds. It is about protecting the systems, people and services that depend on it.
To find out how 4Secure can help your organisation improve secure connectivity and protect critical environments, visit www.4-secure.com or send Alexander an email: [email protected] or connect on Linkedin.
Sources and further reading
- UK National Cyber Security Centre (NCSC) – Disruptive cyber activity highlights risk from internet-exposed systems and edge devices. 2026.
- UK National Cyber Security Centre (NCSC) – Secure Connectivity Principles for Operational Technology. Guidance on network separation, secure connectivity and operational resilience.
- UK National Cyber Security Centre (NCSC) – Building resilience into systems. 2026.
- CERT-FR / ANSSI (French National Cybersecurity Agency) – Security incident targeting remote controllers for refrigeration installations. First published 12 October 2026, updated 16 October 2026.
- Euronews – Cyberattacks hit supermarket fridges and freezers in Europe, Belgium launches investigation. 2 November 2026.
- Reuters – New cyberattack on supermarket fridges sweeps across Europe. 2 November 2026.
- 4Secure – Cross Domain Solutions and TrustedFilter®. Company technology and solution information.
Editorial note: The identity of the attackers and the precise technical route used in every affected location have not been publicly established. The article distinguishes confirmed incidents and official recommendations from the security implications and proposed protective architectures.